MoviesPostsSciFiVideos

Everything you need to know about Robby the Robot!

I am monitored to respond to the name "Robby"

Robby the Robot is a fictional character and science fiction icon who first appeared in the 1956 film Forbidden Planet. He made a number of subsequent appearances in science fiction movies and television programs, usually without specific reference to the original film character.

Robby the Robot originated as a character in the 1956 MGM science fiction film Forbidden Planet. The story centers on a crew of space explorers from Earth who land their starship, the C57-D, on the planet Altair IV, ruled by the mysterious Dr. Morbius. Robby is a mechanical servant that Morbius has designed, built, and programmed using knowledge gleaned from his study of the Krell, a long-extinct race of highly intelligent beings that once populated Altair IV. The film’s plot appears loosely based on William Shakespeare’s play The Tempest (1610), with the planet Altair IV standing in for Shakespeare’s remote island and Dr. Morbius for Prospero. In this context Robby is analogous to Ariel, a spirit enslaved by Prospero.

Robby exhibits artificial intelligence, but has a distinct personality that at times exhibits a dry wit. He is instructed by Morbius to be helpful to the Earthmen and does so by synthesizing and transporting to their landing site 10 tons of “isotope 217”, a lightweight though still effective replacement for the requested lead shielding needed to house the C-57-D’s main stardrive to power an attempt to contact Earth base for further instructions. Morbius programmed Robby to obey a system of rules similar to Isaac Asimov’s Three Laws of Robotics as expressed in I, Robot (1950).[2] One of the laws is a rule against harming or killing humans; this becomes an important plot point near the conclusion of the film when Robby refuses to kill the Id monster. The robot recognizes that the invisible creature is an alter ego/extension of Dr. Morbius. Hollywood purposely, and misleadingly, depicts Robby in the film’s advertising posters as a terrifying adversarial creature carrying a seductively posed unconscious maiden (Altaira), but no such scene is in the film and the images do not reflect in any way Robby’s benevolent and intelligent character. Robby only carries one person during the film, the Earth starship’s Dr. Ostrow, when he is mortally wounded near the end of the film.

Robby was designed by members of the MGM art department and constructed by the studio’s prop department;[3] The design was developed from initial ideas and sketches by production designer Arnold “Buddy” Gillespie, art director Arthur Lonergan, and writer Irving Block. These concepts were refined by production illustrator Mentor Huebner and perfected by MGM staff production draughtsman and mechanical designer Robert Kinoshita.[4]

The robot’s groundbreaking design and dazzling finish represented a radical advance on the conventional “walking oil-can” depictions of robots in earlier features and film serials, and the only previous film robot of comparable style and quality was the “Menschmaschine” created for Fritz Lang’s Metropolis (1927). However, this did not come cheap: As with every aspect of the production of Forbidden Planet, MGM spared no expense on Robby’s design and construction. At a reported cost of US$125,000 (equivalent to at least $US1.1 million today) it was, proportional to total budget, one of the most expensive single film props ever created up to that time, which represented nearly 7% of the film’s total budget of US$1.9 million. (By way of comparison, Robby cost roughly the same, proportional to total budget, as the massive 27-ton, 12 meter-diameter, rotating centrifuge set built for Kubrick’s 2001: A Space Odyssey, which cost US$750,000 against a total budget of around US$11 million). But thanks to its imaginative design, intricate detailing, and the very high visual quality of the final product, Robby immediately became the “face” of the film and soon became an enduring popular culture icon.

The Robby suit was constructed using a range of materials including metal, plastic, rubber, glass, and Plexiglas. The plastic parts were a pioneering example of the use of the then novel technology of vacuum-forming heated plastic over wooden molds. These parts were made from an early form of ABS plastic with the brand name “Royalite”, a material mainly used at the time for making suitcases. The finished suit stands just over 7-foot (2.1 m) tall and was fabricated in three detachable sections: the legs and lower torso, the barrel-like chest section (which included the arms), and the highly detailed ‘head’.

The tall paraboloidal plexiglass dome that covered the head housed the detailed mechanisms representing Robby’s electronic brain. These included a “pilot light” at the very top, an intricate apparatus terminating in three white wire-frame spheres that rotate in planetary fashion (representing his gyroscopic stabilizers), a pair of reciprocating arms in the shape of an inverted “V”, multiple flashing lights, and an elaborate horizontal array of moving levers resembling saxophone keys. Conical protuberances attached to each side of the head carry two small forward-facing blinking lights (his eyes) and two rotating chromed rings, one mounted vertically and the other horizontally, which represent Robby’s audio detectors (his ears). The bottom front section of the head is a curved grille consisting of parallel rows of thin blue neon tubes, which light up in synchronization with Robby’s voice. This neon grille also enabled the operator to both see out and to breathe. The joint between the head and chest section was fitted with a custom-made bearing that allowed the head to rotate 45 degrees in either direction.

Robby’s bulky barrel-shaped torso (a sly reference to Bob Kinoshita’s earlier job as a washing machine designer) featured a front panel fitted with a rectangular flap at the top (into which samples of any substance could be inserted for Robby to analyze and replicate); underneath the slot were two rotating discs fitted with small flashing lights and below that a row of five buttons that moved in and out. Robby’s thick, stubby arms were connected to his body with plastic ball-joints that fitted into matching sockets in the torso, allowing the joints a small amount of rotational movement. The arms could also be extended and this section was covered with a concertina-type tubular rubber sheath. Robby’s three-fingered hands were also made of rubber, finished with metallic paint. The chest section attached to the leg section with special locking clips. The bottom section of the suit hinged at the top of the legs, allowing Robby to both bend forward and swing each leg backward and forward slightly enabling him to walk with relative ease (albeit with rather small and stiff steps). Robby’s legs were made from interlocking globes of vacuum-formed plastic which were connected by internal jointing that permitted the entire leg to bend slightly but cleverly concealed the movement of the hips and knees of the human operator inside.

Robby’s design was a major advance on all previous screen robots in many practical and aesthetic respects. By comparison, the robot Gort, the menacing “interstellar policeman” from the film The Day the Earth Stood Still (1951) was clearly a man in a robot suit, and its design posed several practical problems for shooting. Because it was made of flexible neoprene overall, similar to a skin diver’s wetsuit, the props team had to fabricate two suits that laced up in order to keep the fastenings out of sight while filming Gort moving: One suit opened at the back (for frontal shots), and the second, which opened at the front, was used for the shots in which Gort was seen from behind. The neoprene suit creased at the hips, knees, and elbows when the actor inside moved, giving the impression of being made from a flexible alien metal. The filmmakers diminished the effect by keeping Gort’s movements to a minimum or by only shooting his upper body when he walked.

Robby’s similar size and its construction from rigid sections that had articulated joints combined to create a convincing viewer experience. To access the suit, the three sections were dismantled and the operator climbed into the legs. The torso was then placed around him, the two sections were secured with internal clips, and the operator was strapped into an internal harness; finally the head was fitted, the internal electronics were connected to external power with hidden cables, and the suit was switched on and ready for filming. This design made it possible to film Robby from any angle and for him to move about and carry out the actions required without either betraying the obvious presence of the operator inside or revealing how they got in and out. Robby was operated (uncredited) by stuntmen Frankie Darro and Frankie Carpenter; both actors were of shorter stature (Darro was 5’3″).

One of the suit’s few drawbacks was that the many intricate moving parts in the electrified headpiece made a considerable amount of noise when Robby was powered up. During shooting, Robby’s voice was performed off camera by an uncredited actor who spoke lines into a microphone that was fed into a voice-actuated circuit connected by a cable run into Robby’s foot and then up through a leg and all the way to the neon tubes in Robby’s head; this device generated a control voltage that synchronized the flashing of the neon tubes to the dialogue. The Robby voice heard in the finished film was re-recorded in post-production by actor Marvin Miller. Actor Les Tremayne read the film’s prologue.

Via Wikapedia

Video by JonnyBaak

Tags
Show More

SciFiction

SciFiction.com has a rich history as a Hugo and Nebula award-winning SciFi literary project formerly owned by the SciFi Channel, and is now set to become the premiere destination for all things SciFi and beyond! Geek-chic news, reviews, interviews, events, articles, and the works of relevant artists and authors.

Related Articles

One Comment

  1. Hello outstanding blog! Does running a blog such as this take a lot of work? I’ve very little expertise in coding however I had been hoping to start my own blog in the near future. Anyway, should you have any ideas or tips for new blog owners please share. I know this is off subject however I just needed to ask. Appreciate it!|

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close